Viewing Pcoip Protocol Statistics; Figure 6-3: Administrative Web Interface Session Control Page; Table 6-2: Session Control Page Parameters - Teradici t310 Administrator's Manual

Table 6-2: Session Control Page Parameters

6.3

Viewing PCoIP Protocol Statistics

The Session Statistics page lets you view current statistics when a session is active. If a
session is not active, you can view the statistics from the last session.
TER0606004 Issue 16

Figure 6-3: Administrative Web Interface Session Control Page

Parameter
Connection State
Peer IP
Peer MAC Address
Description
This field displays the current state for the session. Options include:
Disconnected
l
Connection Pending
l
Connected
l
Two buttons appear below the Connection State field:
Connect: If the connection state is Disconnected, click this
l
button to initiate a PCoIP session between the client and its peer
device. If the connection state is Connection Pending or
Connected, this button is disabled.
Note: This option is only available on the client. It is disabled on the
host.
Disconnect: If the connection state is Connected or Connection
l
Pending, click this button to end the PCoIP session for the device.
If the connection state is Disconnected, this button is disabled.
Peer IP Address: Displays the IP address for the peer device. When
not in session, this field is blank.
Peer MAC Address: Displays the MAC address of the peer device.
When not in session, this field is blank.
PCoIP Administrator's Guide
113