Figure 7-4: Administrative Web Interface Attached Devices Page (Client); Table 7-2: Attached Devices Page Statistics - Teradici t310 Administrator's Manual

Figure 7-4: Administrative Web Interface Attached Devices Page (Client)

Table 7-2: Attached Devices Page Statistics

Statistic
Displays
USB Devices
USB Device Status
TER0606004 Issue 16
Description
This section displays the model, status, mode, resolution, serial
number, vendor identification (VID), product identification (PID), and
date of the monitor attached to each port. The first line is for monitor
1. The second line is for monitor 2.
Note: This option is available on a client and is available on the host
when in a PCoIP session.
This section displays the port mode, model, status, device class, sub-
class, protocol, vendor identification (VID), and product identification
(PID) of the USB device attached to the client.
Status options include:
Not Connected: No device is connected.
l
Not in Session: The device is detected outside of a PCoIP
l
session.
Not Initialized: The device is detected in a PCoIP session but the
l
host controller has not initialized the device.
Failed Authorization: The device is detected in a PCoIP session
l
but is not authorized. (For more information, see the Authorized
section on the USB Permissions page in section 5.1).
Locally Connected: The device is detected and authorized but
l
locally terminated in a PCoIP session (for example, a local
cursor).
PCoIP Administrator's Guide
126