Medalist XE Family Product Manual, Rev. B
3.3 Supported ATA commands
The table on page 22 lists all ATA commands that the ST3295A and
ST3660A drives use. Commands that have a particular application for
the drives or that may be of special interest are discussed in the text. For
a complete description of all ATA interface commands the drives use,
refer to the Seagate ATA Interface Reference Manual , part number
36111- xxx . Where indicated, additional information is provided by the
Small Form Factor specification, SFF-8011 Rev 1.1, September 18,
1993.
The table uses the following abbreviations:
FR
Features register
SC
Sector count register
SN
Sector number register
CY
Cylinder register
DH
Drive/head register
This register does not contain a valid parameter for this
n
command.
y
This register contains a valid parameter for this command. In
the drive/head register, both the drive and head parameters are
valid for this command.
The drive/head register contains a valid drive parameter for this
D
command. The head parameter is not valid for this command.
21