Recovering The Configuration Settings - HP t100 Maintenance And Service Manual

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command
with the Computer Setup (F10) Utility before Restore is needed. (See Save to Removable Media
on page 15 in the Computer Setup—File table.)
NOTE:
It is recommended that you save any modified computer configuration settings to a a USB
flash media device or a diskette-like device (a storage device set to emulate a diskette drive) and save
the device for possible future use.
To restore the configuration, insert a USB flash media device or other storage media emulating a
diskette with the saved configuration and perform the Restore from Removable Media command
with the Computer Setup (F10) Utility. (See Restore from Removable Media on page 15 in the
Computer Setup—File table.)
30 Chapter 3 Computer Setup (F10) Utility