Epson SureColor S70670 Quick Reference Manual page 13

For the S50670/S70670, adjust the position of the pressure rollers.
11.
The white low pressure rollers are used for normal printing, and the green high pressure rollers for ink
layering. Their positions vary with the width of the media and the rollers used.
For normal printing, position the white rollers over the media and under the black rectangles.
•
Make sure each rectangle has a white roller under it. Rollers that are beyond the width of the
media should be positioned between the black rectangles. Place as many white rollers on the media
as possible.
For ink layering (printing with white/metallic silver), position the two green rollers under the
•
black rectangles at the left and right sides of the media as close to the edge as possible. Move the
white rollers between the black rectangles.
You may need to shift the media slightly to the left or adjust its position to optimize media use.
•
You will only be able to print between the green rollers when they are in use. When they are not in
use, place the green rollers at the far left and right of the outside black rectangles.
Note: If the rollers are not placed correctly, you will see a warning message on the printer's LCD screen.
Loading Media |
11