Using Computer Setup (F10) Utilities; Computer Setup-File - HP Rp3000 - Point of Sale System Manual

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press
enter Computer Setup. Press
NOTE:
press F10
3. Select your language from the list and press Enter.
4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power and Advanced.
5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, then press Enter. To return to the Computer Setup Utilities
menu, press Esc.
6. To apply and save changes, select File > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
● To reset to factory settings or previously saved default settings (some models), select Apply
Defaults and Exit. This option will restore the original factory system defaults.
CAUTION:
changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
Table 1 Computer Setup (F10) Utility
Heading
File
Storage
Security
Power
Advanced
Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2 Computer Setup—File
Option
2 Computer Setup (F10) Utility
Enter
If you do not press F10
when the blue HP logo screen is displayed to access the utility.
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)
Description
F10 when the blue HP logo screen is displayed to
to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and again
Table
Table 2 Computer Setup—File on page 2
Table 3 Computer Setup—Storage on page 3
Table 4 Computer Setup—Security on page 5
Table 5 Computer Setup—Power on page 7
Table 6 Computer Setup—Advanced (for advanced users)
on page 7
ENWW