Downloading The Latest Version Of Hp Insight Diagnostics - HP Rp3000 - Point of Sale System Getting Started Manual

NOTE:
Set with some computer models only.
If you have already created a Recovery Disc Set, begin the following
procedure at step 4.
1. Click Start > HP Backup and Recovery > HP Backup and Recovery
Manager to open the Backup and Recovery Wizard, then click Next.
2. Select Create a set of recovery discs (Recommended) and click
Next.
3. Follow the instructions in the wizard to create a Recovery Disc Set.
4. Use Windows Explorer to search the Recovery Disc Set for the CD
with the compaq\hpdiags directory.
5. While the computer is on, insert the CD into an optical drive on the
computer.
6. Shut down the operating system and turn off the computer.
7. Turn on the computer. The system will boot to the CD.
NOTE:
may need to change the boot order in the Computer Setup (F10) utility
so that the system attempts to boot to the optical drive before booting
to the hard drive. Refer to the Computer Setup (F10) Utility Guide for
more information.
8. Select the appropriate language and click Continue.
NOTE:
keyboard for your language unless you want to test your specific
keyboard.
9. In the End User License Agreement page, click Agree if you agree
with the terms. The HP Insight Diagnostics utility launches with the
Survey tab displayed.

Downloading the Latest Version of HP Insight Diagnostics

1. Go to http://www.hp.com.
2. Click the Software & Driver Downloads link.
3. Select Download drivers and software (and firmware).
ENWW
HP Insight Diagnostics is included as part of the Recovery Disk
If the system does not boot to the CD in the optical drive, you
It is recommended that you accept the assigned default
HP Insight Diagnostics
5