HP Pavilion n5000 - Notebook PC Reference Manual page 18

Introducing Your Computer
Identifying Parts of the Notebook
To use the power switch
To turn on the computer when it is off, slide the power switch to the left and release it. If
the computer is plugged into AC power or contains a charged battery, the system turns on
and Windows starts automatically.
When the computer is on, you can also use the power switch to turn the system off. In
most situations, however, it is preferable to shut down Windows instead. Click Start, Shut
Down, then select Shut down and click OK. Windows will shut down, and the computer
will automatically turn off.
To use the standby button
You can use the standby button to save the current state of your computer and then to
return quickly to the same state when you are ready to resume work.
To put the computer in standby mode when it is on, press the large blue standby button,
which is found in the middle of the four smaller One-Touch buttons above the center of
the keyboard. Pressing the standby button turns off the display and the hard disk drive,
and it saves your current session to RAM. (Standby can also occur automatically when the
timeout setting in the Power Management Properties is reached.)
To return the computer to normal operation when it is in standby mode, press the standby
button again. The display and the hard disk drive will turn on, and the session you were
working on earlier will be recovered from RAM.
Hint
If your notebook does not turn on when operating on battery power, the battery may not
be sufficiently charged. Plug in the AC adapter and slide the power switch to the left and
release it. Keep the adapter plugged in until your battery is charged again.
18 Reference Guide