Replacing An Adapter - Lenovo IdeaCentre Q200 Hardware Replacement Manual

5. Slide the new optical drive into the bay from the back until it snap into position.
6. Connect the signal and power cables to the drive.
7. Install the front bezel. Refer to "Removing and replacing the front bezel".
8. Refer to the "Completing the installation".

Replacing an adapter

Attention
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://www.lenovo.com/support.
To replace an adapter:
1. Open the computer cover. Refer to "Opening the computer cover".
2. Press the release button
31032756_HaWaii-HRG_EN.indd 31
to lift the adapter latch.
Hardware Replacement Guide
31
2008.1.8 3:31:41 PM