Replacing The Keyboard - Lenovo IdeaCentre Q200 Hardware Replacement Manual

5. Ensure the adapter is fully seated into the adapter connector.
6. Pivot the adapter latch to the closed position to secure the adapter.
7. Refer to the "Completing the installation".

Replacing the keyboard

Attention
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://www.lenovo.com/support.
To replace the keyboard:
1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your
operating system, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to "Locating connectors on the
rear of the computer" and "Locating connectors on the front of the computer".
Note: Your keyboard might be connected to the standard keyboard
31032756_HaWaii-HRG_EN.indd 33
Hardware Replacement Guide
2008.1.8 3:31:42 PM
33