Lenovo IdeaCentre Q200 Hardware Replacement Manual page 39

Important
Correctly route all power supply cables to avoid interference with the drive
bay assembly. Keep cables clear of the hinges and sides of the computer
chassis.
3. Close the computer cover.
4. Reconnect the external cables and power cords into the computer. Refer to
"Locating connectors on the rear of the computer".
5. To update your configuration settings, refer to "Starting the Setup Utility" in the
User Guide or in the Hardware Maintenance Manual.
Note: In most areas of the world, Lenovo requires the return of the defective
CRU. Information about this will come with the CRU or will come a few days
after the CRU arrives.
36
Hardware Replacement Guide
31032756_HaWaii-HRG_EN.indd 36 2008.1.8 3:31:44 PM