Memozizing The Channels; Selecting The Video Signal Source - Samsung TSK2792F Owner's Instructions Manual

OPERATION ]
Memorizing the Channels
Your TV can memorize and store air of the available charmers for both "off air" (antenna)
and cable channels. After the available channels are memorized, use the CH • and
CH • buttons to scan through the channels. This eliminates the need to change channels
by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify tile
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
Press the Menu button
tO display the men u
Press the CH • button
twice to highlight
CHANNEL/'
i!!_ / ANTiC_TV 4 ANT
Auto program
F'metune 4 O0
I,ebell_ 4 .... _"
_M0ve i Ent. [_ FJdt
ZZZZZ ZZZZ
Press the VOL+buttoo.
t ANT/CATV" will be
selected,
,I o_
4
Repeatedly press tbe
VOL+ button to cycle
through these choices:
ANT (antenna) STD,
HRC or IRC(att cable
iii_!/
LNA 4 I_ P.
Note: STD, l [RC and IRC identiiy various types of cable TV
systems. Contact your local cable company to identi(y the type
of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to
"Storing Channels in Memory" (next page).
(]U_I'I} I IHII}: I V ()l'} }/_SII( ;N
a.5