Chapter 2: Installation; Connecting Vhf And Uhf Antennas; Antennas With 300 Ohm Flat %Vin Leads - Samsung TSK2792F Owner's Instructions Manual

INSTALLATION
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see "Antennas with
300 ohm Flat _vin Leads," below.
If your antenna has one lead that looks
like this, see "Antennas with 75 ohm
Round Leads," oil page 2.2.
If you have two antennas, see "Separate
VHF and UHF Antennas," ollpage 2.2.
Antennas with 300-ohm Flat Twin Leads
If"you are using an offair antenna (such as a roof antenna or "rabbit ears") that has
300-ohm twin flat leads, follow the directions below.
1
r ace the wires from the
[wJn eads under the
screws on the 300_75
ohm aeautor mot su[
ledl Use a screworlv-
er to tighten the screws.
Plug the adaptor into the
bottom of the back