Samsung TSK2792F Owner's Instructions Manual page 11

Your NEw TV ]
Remote Control
You can use the remote control up to about 23 feet from the TE When using the remote,
always point it directly at the T_
You can also use your remote control to operate your VCR and cable box. See page 4.1
for details.
O Power
Turns the TV on and off.
0 +100
Press to select channels over 100.
For example, to select channel
121,press" +100: then press "2"
and "1 ,"
0 Mute
Press to temporarily cut off
the sound.
0 OH& and OHm"
(Channel Up/Down)
Press CHA or CHV to change
channels. (Also used to highlight
selections on the on screen
menus,)
VOL -, VOL +
Press increase or decrease the
volume, (Also used to make selec
tions on the on screen menus.)
0 Still picture
Press to stop the action during a
particular scene. Press again to
resume normal video.
0
P. Mode
Adjust the TV picture by
selecting one of the preset
factory settings (or select your
personal, customized picture
settings).
S.Mode
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal
customized sound settings).
0
VCR controls
Stop
Press to stop a tape in your VCR.
Press to rewind a tape,
Pla_/Pause
Press to play or pause the tape.
FF (Fast Forward)
Press to fast forward a tape.
iiiilililililililililil
0
@
@
@
@
MODE
Selects a target device to be con
trolled by the Samsung remote
control (i,e,, TV,VCR,
Cable box, or DVD).
Pre-CH
Tunes to the previouschannel
TV/Video
Press to display all of the
available video sources (i.e.,
Antenna/cable, VCR,DVD, Video
1-4 and S Video 1-2).
Menu
Displays the main on screen
menu.
BO Surround
Selects one of Phantom modes
(Off, Normal, Phantom or Wide).
@ PIP
Activatespicturein picture,
(:I{A}'][}/ ()N{ Y()[I
N}W ]V
1.5