OPERATION
]
Adding
and
Erasing
Channels
(Manual
Method)
Usethe number buttons to directly select the channel that wi!l be added or erased.
Repeatedly pressing this button will alternate between _Channel added'i and
Channel erased."
You can view any channel (including an erased channel) by using the nulnber
buttons on the remote control.
Changing
Channels
Using
the
Channel
Buttons
1
Pressthe CH• or CH• buttons to changechannels.
When you press the CH • or CH • buttons, the TV changes channels in
sequence. You will see all the channels that the TV has memorized.
(The TV
nmst have nmmorized at least three channels.) You will not see channels that
were either erased or not illel]lorized.
Directly
Accessing
Channels
Use the number buttons to quickly tune to any channel.
Press the number
buttons to go directly to a channel. Forexample, to select channel 27, press "2,"
then" 7." The TV witl change channels when you press the second number,
When you use the number buttons, you can directly select channels that were
either erased or not melnorized.
To select a channel over 100, press the +100 button. (For channel 122, press
"+100," then "2," then "2.")
To change to single-digit channels (0 9) faster, press "0" before the
single digit. (For channel "4," press "0," then "4.")
Using
the
Pre-CH
Button
to select
the
Previous
Channel
1
Pressthe Pre-CH button.
TheTVwill switchto the lastchannelviewed,
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then, use the Pre-Cl [
button to quicMy alternate between thenL
(;H,v,_z_ r ._H: I_ fi)l,I}a'k / _ 3.7