Connecting To The Internet - HP Presario All-in-One CQ1-1000 - Desktop PC Getting Started Manual

NOTE:
Use only licensed original software. Installing copied software could result in an unstable
installation, infect the computer with a virus, or be illegal.

Connecting to the Internet

Steps to connect to the Internet:
1. Connect the hardware (might be sold separately).
For a modem, connect to a telephone line (DSL) or cable line and to your computer.
◦
For a wired network connection, connect an Ethernet cable to the computer and to a network
◦
router or LAN device.
For a wireless network connection, use a wireless router with the computer to connect to a WLAN
◦
with an Internet connection.
2. Get Internet service.
Sign up with an ISP. If you already have an account with an ISP, skip this step and follow the
◦
instructions provided by the ISP.
If you did not set up the computer for Internet service during the initial setup, do so now by using
◦
Online Services:
a. Click the Start button, click All Programs, click Online Services, and then click Get
Online.
b. Follow the onscreen instructions to select an ISP and set up Internet service.
NOTE:
Online Services provides a list of ISPs; however, you might choose another ISP or
transfer an existing account to this computer. To transfer existing accounts, follow the
instructions provided by the ISP.
3.
Using your Internet connection through your ISP, open a Web browser and browse the Internet.
NOTE:
If you have issues connecting to the Internet, see Internet access on page 12.
ENWW
Connecting to the Internet
5