HP Pavilion w1200 - Desktop PC Manual page 4

Make each CD or DVD a work in progress.
You can add new text and pictures (for example, more
song names or file names) to a previously burned label.
Simply load the label design you originally used to burn
the label, clear the existing text and graphics to avoid
duplicate information being burned, then add the new
label information and burn again.
Preview your label. Use the Print Preview function
(or print out on paper) to see your label before burning
to make sure it is exactly the way you want it.
Cut down on your label burning time. Switch
from Best to Normal mode: you'll burn fewer tracks per
inch for a lighter, but faster, label. Or use the Title or
Content templates instead of Full Disc. Because
LightScribe burns (starting in the center of the disc)
outward in concentric rings, Title and Content templates
save time by confining your label to a narrower band.
For the same reason, using circular text instead of
straight text can also speed up burn times.
4
Creating Disc Labels with LightScribe
Filename: m4adline_AP.doc Title: Addendum [3-column 3 + pages]
Template: Normal.dot Author: jiml
Revision #: 24 Page: 4 of 8 Printed: 11/02/04 10:48 AM
Last Saved By: jiml
Go for contrast. A high-contrast photo or graphic
stands out better than a picture in mostly soft middle
tones. Use your software's preview feature to see how
the graphics you use look on disc.
Keep using your PC. While the label is being
created, you can continue to use your PC for other
activities. The LightScribe software indicates the time
remaining to burn the design.
Avoid sudden shock or vibration. While the
disc is labeling, avoid any sudden shock or vibration
to the PC.