Lenovo ThinkCentre A62 Deployment Manual page 82

has extended options. When the Rescue and Recovery program is started, you will see the simplified user
interface by default. By disabling the simplified user interface, you can have advanced user interface
displayed each time the Rescue and Recovery program starts.
You can disable interface switching so that a user will not be able to switch between the two interfaces.
To disable the interface switching, set the following policy to HIDE:
AllowInterfaceSwitching
For additional information about the Rescue and Recovery settings and working with Active Directory and
Group Policy, see the accompanying XML/ADM Supplement for the deployment guide located on the
ThinkVantage Technologies Administrator Tools page:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVAN-ADMIN#rnr
76
Rescue and Recovery 4.5 Deployment Guide