Lenovo ThinkCentre A62 Deployment Manual page 36

c:\SWTOOLS\C\0 Data0 Data1
EFSFile HashFile Info TOCFile
to
C:\RRbackups\C\0 Data0 Data1
EFSFile HashFile Info TOCFile
Determine \RRBackups space consumed
RRUTIL /bs
Determine the amount of space that is consumed by \RRbackups
1. Ability to determine how much space is consumed by backups. Listing by backup, for example, base
and each incremental how much space is consumed.
2. Sample command: RRUTIL /bs would display the backup space on the console.
As previously stated in this chapter, the rrutil.exe file enables you to GET files from and PUT files into the
Rescue and Recovery environment, it also allows listing of files in the Rescue and Recovery environment and
in the backups folder. These procedures are used for all file customizations of the Rescue and Recovery
environment. The following procedures provide another example of how to utilize the GET and PUT function
with the Rescue and Recovery environment.
To use rrutil.exe, do the following:
1. Copy rrutil.exe to the root of the C drive.
2. Create getlist.txt file with the following syntax:
\preboot\usrintfc\file name
Save the file as c:\temp\getlist.txt.
3. At a command prompt, type the rrutil.exe command and one of the switches defined in the following
table. Then, complete the command with the appropriate parameters, as shown in the following table.
Table 15. Command and switch options
Command and switch options
RRUTIL -l1
RRUTIL -l2
RRUTIL -l4
RRUTIL -g c:\temp\getlist.txt C:\temp
RRUTIL -d c:\temp\ dellist.txt
RRUTIL -p c:\temp
RRUTIL -r path \oldname.ext newname.ext
RRUTIL -r \temp\rr\test.txt test2.txt the file is in the
preboot\rr directory
RRUTIL -bp c:\temp
RRUTIL -bl path
RRUTIL -bl lists to c:\rr-list.txt
rrutil -bl c:\SWTOOLS
RRUTIL -bg c:\temp\bgetlist.txt C:\temp
RRUTIL -bs
4. After you have performed the GET routine, you can then edit the file using a standard text editor.
30
Rescue and Recovery 4.5 Deployment Guide
Result
List the contents of preboot directory.
List the contents of minint directory.
List the contents of the root of the C drive or root
of type 0x07 partition.
Get files from preboot partition.
Delete files from the preboot partition.
Add or replace files in the preboot partition.
Rename a file in the Predesktop Area.
Update or replace files in RRBACKUPS virtual
partition.
List the RRBACKUPS directory.
Copy individual files from the \RRBACKUPS.
Display space used by RRBackups directory.