Lenovo ThinkCentre A62 Deployment Manual page 13

Windows Installer looks for a .tvt file with a compatibility code (for example: AA, AB) that is equal to
the minimum version compatibility code and a level that is greater than the current version level (all
other version fields in the .tvt filename must match the minimum version exactly). If it does not find a
file, the install process continues without updating the Predesktop Area. If the current level is less
than the minimum level, the Windows Installer will look for a .tvt file with a compatibility code (AA or
AB). that is equal to the minimum version compatibility code and a level that is greater than or equal
to the minimum version level (all other version fields in the .tvt filename must match the minimum
version exactly). If a file is not found meeting these criteria, the installation is halted.
• Current code < Minimum code:The Windows Installer will look for a .tvt file with a compatibility
code (for example: AA, AB) that is equal to the minimum version compatibility code and a level that is
greater than or equal to the minimum version (all other version fields in the .tvt filename must match
the minimum version exactly). If a file is not found meeting these criteria, the installation is halted.
The Rescue and Recovery program supports the following languages:
• Brazilian Portuguese
• Danish
• Dutch
• English
• Finnish
• French
• German
• Italian
• Japanese
• Korean
• Norwegian
• Portuguese
• Russian
• Spanish
• Swedish
• Simplified Chinese
• Traditional Chinese
Rescue and Recovery custom public properties
The installation package for the Rescue and Recovery program contains a set of custom public properties
that can be set on the command line when running the installation. The available custom public properties
are:
Table 3.
Property
PDA
CIMPROVIDER
Description
Specifies whether to install the Predesktop Area. Default
value is 1. 1 = install Predesktop Area. 0 = do not install
Predesktop Area. NOTE: This setting is not used if any
version of the Predesktop Area already exists.
Specifies whether to install the Common Information
Model (CIM) Provider component. Default is to not
install the component. Specify CIMPROIVIDER=1 on the
command line to install the component.
7
.
Chapter 2 Installation