Sony Handycam NEX-VG30E Instruction & Operation Manual page 85

On
Always displays. The rec button on the LCD
screen is not displayed when shooting.
Tips

The icons or indicators are displayed in the

following cases.
When you turn on your camcorder.

The LCD screen is touched (Except rec button

on LCD screen).
When you switch your camcorder to the

movie recording, photo recording, or
playback mode.
You can switch the display by pressing

DISPLAY.
REC Lamp (Recording lamp)
You can make the camera recording lamp
on the front of your camcorder not to turn
on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
Shooting w/o Lens
Sets whether or not the recording can be
started when no lens is attached.
 Disable
The camcorder does not start shooting, and
informs you if the lens is attached incorrectly.
Enable
Allows you to use non-Sony E-mount lenses
and mount adaptors.
Remote Ctrl (Remote control)
 On
Select this when you use the supplied Wireless
Remote Commander (p. 112).
Off
Select this if you do not intend to use the
supplied Wireless Remote Commander.
Tips

Select [Off] when you want to prevent your

camcorder from responding to a command sent
by another remote control unit.
A. Shut Off (Auto shut off )
You can set your camcorder to turn off
automatically when you do not operate
your camcorder for more than about 5
minutes.
 On
The camcorder turns off automatically.
Off
The camcorder does not turn off
automatically.

Notes
The camcorder does not turn off automatically

when using the AC Adaptor.
Language Setting
You can select the language to be used on
the LCD screen.
Tips

Your camcorder offers [ENG[SIMP]]

(simplified English) for when you cannot find
your native tongue among the options.
24p Mode (NEX-VG30E/
VG30EH only)
You can shoot 24p movies by the PAL-
based system.
If you select [OK] in the [24p Mode]
screen, the camcorder reboots in 24p mode.
When you select [OK] in the [Cancel 24p
Mode] screen, the camcorder reboots in
50i mode.

Notes
You cannot save 24p movies on a memory

card recorded by PAL-based system. You need
another memory card.
When you have activated [24p Mode], the

movie recording format is limited to AVCHD
24p (FX, FH). The format of the video signal
GB