Mount Adaptor - Sony Handycam NEX-VG30E Instruction & Operation Manual

If dust or debris adheres on the image sensor
Turn off the camcorder and detach the lens. Clean the image sensor and the surrounding area
using a blower (sold separately), and then reattach the lens.

Notes
Do not use a spray blower because it may scatter water droplets inside the camcorder body.

Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not

touch the image sensor.
Hold the camcorder's face downward to prevent the dust from resettling in the camcorder.

Do not apply a mechanical shock to the camcorder during cleaning.

If you cannot clean the image sensor by the above procedure, consult your Sony dealer or local authorized

Sony service facility.

Mount Adaptor

Using a Mount Adaptor (sold separately), you can attach an A-mount lens (sold separately) to
your camera. For details, refer to the operating instructions supplied with the Mount Adaptor.
The available functions differ depending on the Mount Adaptor type.
Functions
Autofocus
AF system
AF/MF Select
Autofocus Mode (Only
photo mode)
LA-EA1
Available with SAM/
SSM lens only
*
Contrast AF
Switchable on the lens
Single
GB
1
LA-EA2
Available
Phase-detection AF
SAM/SSM lenses: switchable on the lens
Other lenses: switchable on the FOCUS
button
Single/Continuous