Sony Handycam NEX-VG30E Instruction & Operation Manual page 82

Camera Data
Movie
Photo

White Balance

SteadyShot off

Shutter Speed

IRIS (Aperture value)
 Gain
 Brightness
 Flash

Exposure compensation

White Balance (B-A, G-M)

ISO

White Balance (Color Temp.)
Tips

The data code is displayed on the TV screen if

you connect your camcorder to a TV.
The indicator toggles through the following

sequences as you press DATA CODE on the
Wireless Remote Commander: [Date/Time] 
[Camera Data]  [Off] (no indication).
Depending on the memory card condition, bars

[--:--:--] appear.
Volume
You can adjust the volume of playback
sound by touching
TV Type
You need to convert the signal depending
on the TV connected when playing back
movies and photos. The recorded movies
/ .
and photos are played back as following
illustrations.
 16:9
Select this to view your movies on a 16:9
(wide) TV. The recorded movies and photos
are played back as shown below.
Movies and photos
recorded in 16:9
(wide) mode
4:3
Select this to view your movies and photos on
4:3
a standard TV. The recorded movies and
photos are played back as shown below.
Movies and photos
recorded in 16:9
(wide) mode

Notes
Horizontal to vertical ratio of high definition

image quality (HD) movies is 16:9.
When you connect your camcorder to a TV

compatible with the ID-1/ID-2 system, set [TV
Type] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied with your TV
VG30H only)
.
Component Output
Select [Component] when connecting your
camcorder to a TV with the component
input jack.
1080p/480i (NEX-VG30/VG30H)
1080p/576i (NEX-VG30E/VG30EH)
Select this when connecting your
camcorder to a TV that has the component
input jack and is capable of displaying the
1080p signal.
GB

Movies and photos
recorded in 4:3 mode
Movies and photos
recorded in 4:3 mode
(NEX-VG30/