Mount Adaptor - Sony Handycam NEX-VG30E Instruction & Operation Manual

If dust or debris adheres on the image sensor
Turn off the camcorder and detach the lens. Clean the image sensor and the surrounding area
using a blower (sold separately), and then reattach the lens.

Notes
Do not use a spray blower because it may scatter water droplets inside the camcorder body.

Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not

touch the image sensor.
Hold the camcorder's face downward to prevent the dust from resettling in the camcorder.

Do not apply a mechanical shock to the camcorder during cleaning.

If you cannot clean the image sensor by the above procedure, consult your Sony dealer or local authorized

Sony service facility.

Mount Adaptor

Using a Mount Adaptor (sold separately), you can attach an A-mount lens (sold separately) to
your camera. For details, refer to the operating instructions supplied with the Mount Adaptor.
GB