Page 1
P2L-B Pentium II Motherboard ® USER’S MANUAL...
Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
How this manual is organized ............7 Item Checklist .................. 7 II. FEATURES ..................8 Features of the ASUS P2L-B Motherboard ........8 Introduction to ASUS Smart Series motherboards ....9 Parts of the ASUS P2L-B Motherboard ........... 11 III. INSTALLATION ................12 ASUS P2L-B Motherboard Layout ..........
Page 5
ASUS PCI-SC200 & PCI-SC860 SCSI Cards ........ 59 Setting Up the ASUS PCI-SC200 & PCI-SC860 ....... 60 Setting the INT Assignment for the ASUS PCI-SC200 ..... 60 Terminator Requirements for SCSI Devices ......60 Terminator Settings for the ASUS PCI-SC860 ......61 Terminator Settings for the ASUS PCI-SC200 ......
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. ASUS P2L-B User’s Manual...
Support Software: Information on the included support software VI. ASUS SCSI Cards: Installation of ASUS SCSI cards (optional) VII. ASUS L101 Card: Installation of the ASUS LAN card (optional) Item Checklist Please check that your package is complete. If you discover damaged or missing items, please contact your retailer.
II. FEATURES Features of the ASUS P2L-B Motherboard The ASUS P2L-B is carefully designed for the demanding PC user who wants many intelligent features in a small package. This motherboard: • Intel Chipset: Features Intel’s 440LX AGPset with I/O subsystems.
OS such as in the next release of Windows 95 must be used. • PC ’97 Compliant - Both the BIOS and hardware levels of ASUS smart series of motherboards meet PC ’97 compliancy. The new PC 97 requirements for...
Page 10
Message LED - Chassis LEDs now act as information providers. Through the way a particular LED illuminates, the user can determine the stage the computer is in. A simple glimpse provides useful information to the user. ASUS P2L-B User’s Manual...
II. FEATURES Parts of the ASUS P2L-B Motherboard AT Power Thermal Sensor Super Multi-I/O PS/2 Mouse, USB, IrDA Serial, Parallel, Floppy Connector Hardware Monitor 2 ISA Slots 3 PCI Slots ATX Power Connector AGP Slot Intel’s 440LX AGPset 3 DIMM Sockets...
III. INSTALLATION ASUS P2L-B Motherboard Layout COM 1 Key- Hardware Monitor Keyboard board PS/2 Mouse, Power Serial Ports USB, IrDA AT Power Input Parallel (Printer) Port COM 2 Thermal Sensor Power Fan ATX Power Input Floppy Drives Wake Pentium II Thermal...
Page 13
32 ATX Motherboard Power Connector (20-pins) 19) AT POWER p. 32 AT Motherboard Power Connector (12-pins) The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not use this address or else conflicts will occur. ASUS P2L-B User’s Manual...
3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. ASUS P2L-B User’s Manual...
Clear Data [short solder points momentarily] CLRTC P2L-B Clear RTC RAM 2. Keyboard Power Up (KBPWR) Set this jumper to Enable if you wish to use your keyboard to power up your system. Requires an ATX power supply that can supply at least 300mAmp on the +5VSB lead and new BIOS support.
Page 16
Intel Pentium II Processor in a SEC Cartridge (233-333MHz 256/512KB L2 Cache) NOTE: Voltage Regulator Output Selection (VID) is not needed for the Pentium II processor because it sends a VID signal directly to the onboard power controller. ASUS P2L-B User’s Manual...
• BIOS shows EDO or SDRAM memory on bootup screen. • 8 chip/side modules do not support ECC, only 9 chip/side modules support ECC. • Single sided modules are usually 16 or 64 MB, double sided are usually 8, 32, or 128MB. ASUS P2L-B User’s Manual...
60 Pins 88 Pins Lock P2L-B 168 Pin DIMM Memory Sockets The Dual Inline Memory Module (DIMM) must be 3.3V Unbuffered for this moth- erboard. You can identify the type of DIMM module by the illustration below: 168-Pin DIMM Notch Key Definitions (3.3V)
Heatsink bottom Groove for the Support Top Bar Heatsink Support Base/Top Bar (Items 4-7) Pentium II Processor Heatsink (Item 8) Intel Pentium II Processor in a SEC Cartridge CPU (Item 9) (233-333MHz 256/512KB L2 Cache) ASUS P2L-B User’s Manual...
Page 20
Then, screw the captive nuts in place. WARNING! Do not overtighten the captive nuts. Doing so could damage your motherboard. Tighten captive nuts to no more than 6±1 inch/pound. Lock holes Captive nut Captive nut ASUS P2L-B User’s Manual...
Page 21
With the heatsink facing the motherboard’s chipsets, press the cartridge gently but firmly until it is full inserted. Push lock inward ASUS P2L-B User’s Manual...
Page 22
(7) 6. Attach the Thermal Sensor Connector (optional): If you purchased the spe- cially designed fan and thermal monitor heatsink, you can connect the thermal sensor wire to the motherboard. P2L-B CPU Thermal Sensor Connector ASUS P2L-B User’s Manual...
“Unlock” to “Lock.” You will not be able to also use the heatsink support top bar because of the fan. The heatsink support top bar will, how- ever, still be included in the package, in case you use a heatsink without a fan. ASUS P2L-B User’s Manual...
“Resources” tab which shows the Interrupt number and ad- dress. Make sure that no two devices use the same IRQs or your computer will experience problems when those two devices are in use at the same time. ASUS P2L-B User’s Manual...
Accelerated Graphics Port This motherboard provides an accelerated graphics port (AGP) slot to support a new generation of graphics cards with ultra-high memory bandwidth. P2L-B Accelerated Graphics Port (AGP) ASUS P2L-B User’s Manual...
WARNING! Some pins are used for connectors or power sources. These are clearly separated from jumpers in “Map of the ASUS Motherboard.” Placing jumper caps over these will cause damage to your motherboard. IMPORTANT: Ribbon cables should always be connected with the red stripe on the Pin 1 side of the connector.
Page 27
Connect the Red stripe to Pin 1 Pin 1 P2L-B Parallel (Printer) Connector 4. Serial Port Connectors (COM1/COM2, two 10-1 pins) These connectors support the provided serial port ribbon cables with mounting bracket. Connect the ribbon cables to these connectors and mount the bracket to the case on an open slot.
Page 28
Primary or Secondary IDE connectors will cause the LED to light up. TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. IDE_LED P2L-B IDE Activity LED ASUS P2L-B User’s Manual...
Page 29
This connector allows the system to power up when there is a wakeup package (signal) received from the network through the ASUS PCI-L101 LAN card. Re- quires the ASUS PCI-L101 and an ATX power supply with at least 720mAmp 5VSB.
Page 30
15. Speaker Connector (SPEAKER, 4-pins) This 4-pin connector connects to the case-mounted speaker. Keyboard Lock Speaker Connector Power LED Reset SW Message LED ATX Power SMI Lead Switch* Requires an ATX power supply. P2L-B System Panel Connections ASUS P2L-B User’s Manual...
Page 31
17: Infrared Receive 8: (no connection) 18: Infrared Transmit 9: +5 Volt P2L-B PS/2 Mouse, USB, IrDA Module Connector Optional USB/MIR 17. Second IrDA-Compliant Infrared Connector (IR, 5-pins) This connector supports the optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature.
Page 32
For Wake on LAN support, your ATX power supply must supply at least 720mAmp. P2L-B ATX Power Connector 19. AT Power Supply Connector (POWER, 12-pins) This connector connects to a standard 5 Volt power supply. To connect the leads from the power supply, ensure first that the power supply is not plugged.
Shut down the computer?. The system will give three quick beeps after about 30 seconds and then power off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” will not appear when shutting down with ATX power supplies. ASUS P2L-B User’s Manual...
“Save Current BIOS To File” option. If the boot block in the file is different from the current boot block, this option will not update the main block. Instead, it will display the following messages. ASUS P2L-B User’s Manual...
This option erases the Plug-and-Play (PnP) configuration record. 2. Update BIOS Including Boot Block and ESCD This option updates the boot block, the baseboard BIOS, and the PnP extended sys- tem configuration data (ESCD) parameter block from a new BIOS file. ASUS P2L-B User’s Manual...
PnP BIOS and therefore cannot be programmed by the Flash Memory Writer utility. 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) or a BBS (Bulletin Board Service) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the disk you created earlier.
When you invoke Setup, the CMOS SETUP UTILITY main program screen will appear with the following options: NOTE: The following BIOS screens and descriptions were intended for the BIOS version at the time of product release. Your BIOS version may be slightly different. ASUS P2L-B User’s Manual...
To set the date, highlight the “Date” field and then press either <Page Up>/<Page Down> or <+>/<–> to set the current date. Follow the month, day and year format. Valid values for month, day and year are: Month: (1 to 12), Day: (1 to 31), Year: (up to 2079) ASUS P2L-B User’s Manual...
Page 39
IDE hard disks; set it to Large for drives over 528MB that do not sup- port LBA. Large type of drive can only be used with MS-DOS and is very uncom- mon. Most IDE drives over 528MB support the LBA mode. ASUS P2L-B User’s Manual...
Page 40
If you are using a VGA or any higher resolution card, choose EGA/VGA. Halt On (All Errors) This field determines which types of errors will cause the system to halt. Choose from All Errors; No Errors; All,But Keyboard, All,But Diskette; and All,But Disk/Key. ASUS P2L-B User’s Manual...
CPU Level 1 Cache / CPU Level 2 Cache (Enabled) These fields allow you to choose from the default of Enabled or choose Disabled to turn on or off the CPU’s Level 1 and Level 2 built-in cache. ASUS P2L-B User’s Manual...
Page 42
This field enhances hard disk performance by making multi-sector transfers instead of one sector per transfer. Most IDE drives, except older versions, can utilize this feature. Selections are HDD MAX, Disabled, 2, 4, 8, 16, and 32. ASUS P2L-B User’s Manual...
Page 43
8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) (250) This field sets the time interval for displaying the first and second characters. Four delay rate options are available: 250, 500, 750, and 1000. ASUS P2L-B User’s Manual...
Timing for 16-bit ISA cards. Leave on default setting. 8-bit I/O Recovery Time (1 BUSCLK) Timing for 8-bit ISA cards. Leave on default setting. Graphics Aperture Size (64MB) Memory-mapped, graphics data structures can reside in a Graphics Aperture. Leave on default setting. ASUS P2L-B User’s Manual...
Page 45
When Enabled, this field allows you to connect your floppy disk drives to the onboard floppy disk drive connector instead of a separate controller card. If you want to use a different controller card to connect the floppy disk drives, set this field to Disabled. ASUS P2L-B User’s Manual...
Page 46
Because each IDE device may have a different PIO Mode timing of 0, 1, 2, 3, or 4, it is necessary for these to be independent. DMA Mode timing allows 0, 1, or 2. The default setting of Auto will allow auto-detection to ensure optimal performance. ASUS P2L-B User’s Manual...
Video Off Option (Always On) This field determines when to activate the video off feature for monitor power management. The settings are All Modes -> Off; Always On; Suspend -> Off; and Susp,Stby -> Off . ASUS P2L-B User’s Manual...
Page 48
4 seconds will place the system in sleep mode. No Function disables the ATX switch function when the button is pressed under 4 seconds. Regardless of the setting, holding the ATX switch for more than 4 seconds will power off the system. ASUS P2L-B User’s Manual...
Page 49
Disabled leaves your system off after reapplying power and En- abled boots up your system after reapplying power. Wake on LAN (Enable) Enable allows the ASUS PCI-L101 fast Ethernet card to wake up the system using the proper software. Disable turns off this feature. Automatic Power Up (Disabled) This allows you to have an unattended or automatic power up of your system.
ICU, you must set the field for that IRQ to Yes. For example: If you install a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to Yes............................ASUS P2L-B User’s Manual...
Page 51
Enabled reserves an IRQ# for the USB to work, Disabled does not allow the USB to have an IRQ# and therefore prevents the USB from functioning. If you do not use USB devices, you may Disable this feature to save an extra IRQ# for expansion cards. ASUS P2L-B User’s Manual...
<Enter>. The system displays a confirmation message on the screen. Press <Y> and then <Enter> to confirm. Press <N> and then <Enter> to abort. This feature does not affect the fields on the Standard CMOS Setup screen. ASUS P2L-B User’s Manual...
<Enter> instead of entering a new password when the “Enter Password” prompt appears. A message confirms the password has been disabled. NOTE: If you forget the password, see CMOS RAM in section III for procedures on clearing the CMOS. ASUS P2L-B User’s Manual...
The auto-detection feature can only detect one set of parameters for a particular IDE hard drive. Some IDE drives can use more than one set. This is not a problem if the drive is new and empty. ASUS P2L-B User’s Manual...
Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight the “Exit Without Sav- ing” option on the main screen and then press <Enter>. ASUS P2L-B User’s Manual...
Patch for PIIX4 chipset: Installs the necessary drivers for PCI card and PCI bridge for Windows 95/95a (OSR1) and 95b (OSR2) for ASUS motherboards. • Browse this CD: Allows you to see the contents of the ASUS support CD. • Technical Support Form: View the Technical Support Form with Notepad.
V. SUPPORT SOFTWARE Desktop Management Interface (DMI) Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides a DMI Con- figuration Utility to maintain the Management Information Format Database (MIFD). DMI is able to auto-detect and record information pertinent to a computer’s system such as the CPU type, CPU speed, and internal/external frequencies, and memory size.
V. SUPPORT SOFTWARE Using the ASUS DMI Configuration Utility Use the (left-right) cursors to move the top menu items and the (up-down) cursor to move between the left hand menu items. The bottom of the screen will show the available keys for each screen. Press enter at the menu item to enter the right hand screen for editing.
SCO UNIX floppy disk. Windows 95 support is also available using the device drivers included within the Windows software. The ASUS PCI-SC200 and ASUS PCI-SC860 are Plug and Play adapters that are auto detected by BIOS and current operating systems that support Plug and Play features.
VI. ASUS PCI SCSI Cards Setting Up the ASUS PCI-SC200 & PCI-SC860 There are two jumper settings you may need to make on the ASUS PCI-SC200 to set it up. One setting assigns the PCI INT interrupt, the other sets the card’s termination.
Not Terminated Terminator Setting (Terminated / Not Terminated) Decide whether or not you need to terminate the ASUS PCI-SC200 based on its position in the SCSI chain. Only the devices at each end of the chain need to be terminated. If you have only internal or only external devices connected to the ASUS PCI-SC200, then you must terminate the ASUS PCI-SC200.
SCSI identification number that is not in use by any other SCSI device. There are eight possible ID numbers, 0 through 7. The ASUS PCI-SC200 and ASUS PCI-SC860 cards have fixed SCSI IDs of 7. The SCSI ID serves two purposes: •...
Motherboard type Other If you are using the ASUS PCI-L101 on an ASUS motherboard, leave the jumper on its defaut setting of “ASUS.” If you are using another brand of motherboard, set the jumper to “Other.” Connect the Wake on LAN (WOL) output signal to the motherboard’s WOL_CON in order to utilize the wake on LAN feature of the moth-...
A: To enable Wake-On-LAN function, your system requires Ethernet LAN adapter card that can activate Wake-On-LAN function, a client with Wake-On-LAN capa- bility, and software such as LDCM Rev. 3.10 or up that can trigger wake-up frame. ASUS P2L-B User’s Manual...