Asus P2L-B User Manual page 27

III. INSTALLATION
3. Parallel Printer Connector (PARALLEL, 26-1 pins)
This connector supports the included parallel port ribbon cable with mounting
bracket. Connect the ribbon cable to this connection and mount the bracket to
the case on an open slot. A PS/2 mouse connector is included for the USB/IR/
Mouse onboard connector if the optional USB/MIR connector is not used. You
can make available the parallel port and choose the IRQ through the Onboard
Parallel Port in Chipset Features of the BIOS SOFTWARE. (Pin 26 is re-
moved to prevent inserting in the wrong orientation when using ribbon cables
with pin 26 plugged).
NOTE: Serial printers must be connected to the serial port.
R
P2L-B Parallel (Printer) Connector
4. Serial Port Connectors (COM1/COM2, two 10-1 pins)
These connectors support the provided serial port ribbon cables with mounting
bracket. Connect the ribbon cables to these connectors and mount the bracket to
the case on an open slot. You can make available the serial port and choose the
IRQ through the Onboard Serial Port in Chipset Features of the BIOS SOFT-
WARE. (Pin 10 is removed to prevent inserting in the wrong orientation
when using ribbon cables with pin 10 plugged).
R
P2L-B Serial Port Connectors
Connect the Red
stripe to Pin 1
Pin 1
COM 1
Pin 1
COM 2
Pin 1
ASUS P2L-B User's Manual 27