Asus P2B-VM User Manual page 15

III. INSTALLATION
3. Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your
computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-
enter user preferences.
RTC RAM CLRTC
Clear CMOS [short solder points momentarily]
R
P2B-VM Clear RTC RAM
4. Keyboard Power (Wake) Up (KB_WAK)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing the spacebar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your com-
puter will not power on if you set this to Enable and if you do not have the right
ATX power supply.
BIOS setting (see "Power Up By Keyboard" in the Power Management Setup of
the BIOS SOFTWARE) or else conflicts will occur.
Setting KB WAK
Disable [1-2] (default)
Enable [2-3]
R
P2B-VM Keyboard Power (Wake) Up
CLRTC
WARNING! This jumper setting must coincide with the
KB_WAK
1
2
3
Disable
(Default)
ASUS P2B-VM User's Manual
KB_WAK
1
2
3
Enable
15