Asus P2B-D2 User Manual page 143

3. To create a new partition on the disk device, press <Ins>. A screen similar to this
appears:
Adaptec SCSI Disk Setup Program v3.33
Select SCSI Device to Partition
HA #0 - Target 0 QUANTUM LP105S 910109405
HA #0 - Target 4 IOMEGA
Logical Drive Info
64 head
32 sectors/track
85 cylinders
512 bytes/sector
85 megabytes
2AEEFh blocks
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
The Create a DOS Partition window suggests that you create one partition on
the disk device, equal to its entire capacity. If this is what you want to do, skip to
step 5.
4. To change the size of the partition, use the arrow keys to select Start Cylinder
and End Cylinder, and type in the numbers you want. Partitions up to 2 Gigabytes
are supported.
5. When the number of cylinders is what you want, press <Esc>. When the confir-
mation prompt appears, select Yes and press <Enter> to create the partition.
To create more partitions on the same disk device, repeat steps 3, 4, and 5. As
you create partitions on the disk, they are added to the window at the upper right
of the screen, as shown here:
Adaptec SCSI Disk Setup Program v3.33
Select SCSI Device to Partition
HA #0 - Target 0 QUANTUM LP105S 910109405
HA #0 - Target 4 IOMEGA
Logical Drive Info
64 head
32 sectors/track
85 cylinders
512 bytes/sector
85 megabytes
2AEEFh blocks
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
6. Press <Esc> to return to the Select SCSI Device to Partition window. If you
want to partition a different disk device, select the device from the list and re-
peat the earlier steps.
7. To quit afdisk, press <Esc> and select Yes to confirm that you want to quit.
Appendix
Type Start End
BETA90
Create a DOS Partition
Start Cylinder: 0
End Cylinder: 84
Type Start End
DOS 0 84
BETA90
ASUS P2B-D2 User's Manual
Megs
Megs
85
143