Ez-Scsi Utility; Quick Start Instructions; Windows95 Or Windowsnt; Windows/Windows For Workgroups 3.1X - Asus P2B-D2 User Manual

iii. EZ-SCSI Utility
Welcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Adaptec
EZSCSI gives you what you need to use SCSI devices in DOS, Windows ® 3.1x, or
Windows for Workgroups3.1x.
NOTE: The ADAPTEC EZ-SCSI UTILITY does not provide drivers for Win-
®
dows 95 and WindowsNT™.

Quick Start Instructions

First, install SCSI devices (see the hardware documentation for details). Then fol-
low the instructions for your operating system software in one of the following sec-
tions. We recommend that after you install Adaptec EZSCSI, you run SCSITutor to
learn more about the features of SCSI.

Windows95 or WindowsNT

If you want to install Windows95 or WindowsNT on a new computer system, you
may not be able to access your SCSI CDROM drive at first. (Usually, you install
Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM
drive, follow the DOS Quick Start instructions.

Windows/Windows for Workgroups 3.1x

1. Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on
your computer.
2. Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3. Select File/Run from the Program Manager menu.
4. When the Run dialog box appears, type a:\setup if you are using the A drive or
b:\setup if you are using the B drive. Then click OK.
5. Follow the onscreen instructions.

DOS

1. Install DOS 6.x or later and start it running on your computer.
2. Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3. At the DOS prompt, type a:\install (assuming your 3.5" floppy is A: drive). Then
press <Enter>.
4. Follow the onscreen instructions.
136
Appendix
ASUS P2B-D2 User's Manual