Use The Operation Buttons - Haier HWM55-918P User Manual

Use the operation buttons

Description of the function of buttons
Mode and meaning of the indicators
Off
On: indicate the program about to run,or indicate the selected mode or
Flashing: indicate the running program, or indicate the selected mode or indicate the water level
Child lock function
Push down the button for 5 seconds ,the digitron displays "CL".Then you can continue setting desired washing procedures.After
setting ,push the "Start/pause" button, The child lock function is activated.All of the buttons are locked and can't make selection
Release the child lock function :push down "Program " button for more than 5 seconds ,
function is released.
When using the child lock function,if the top cover is opened,the machine will stop and display E2 alarm .After 15 minutes the
machine will automatic drainage .If you want to clear the E2 alarm ,please close the top cover and press the "Start/pause "
button .The E2 alarm will be cleared.
Remain time digitron
It displays "--" during detecting.
It displays total remained time during the running program(min).
It displays I remained reserved time during reserved
program(hours) .
It displays abnormal symbol in abnormal
situation.(See to Page12)
Flashing Solid
41L 46L
37L
33L
24L 29L
18L
12L
WATER LEVEL
"Delay" button
The digitron displays the time remained (in minute)
before the washing is finished.
Push down the reserve button. The reserve indicator
light is on ,the digitron displays the reserve time of
finishing washing (in hour).The point light flashs to
indicate in reservation
Push the "DELAY"button to display the reserve mode.
"WATER LEVEL" button
The washing machine can detect the laundries automatically during the
STANDARD program. After detection, it will set the water level to suitable
value among 29L ,37L,46L automatically.
You can also set water level by yourself. After the machine is started, it will
not set water level automatically. You shall push the START/PAUSE button
to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and
will display water level 29L .If wet laundries are put in, it may display water
level 46L. You must set suitable water level by yourself.
If TUB DRY program is selected, the water level will not respond.
During operation of wash and rinse program, you can push down the water
level button to add water. When you release the button, or it reaches the
overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the
different moisture level of the laundries.
The water level of rinsing will be higher than the water level of wash during
the STANDARD ,SOAK,SOFT and WASH RINSE SPIN program.(except
the highest water level or choosing the water level of rinsing by yourself)
Page 12
Remain(Minutes)
Reserve(Hours)
DELAY
indicate the water level
POWER ON/OFF
Push the power button to switch on the power
When the power is on push it again to switch off the
power .
Push the power button to switch on the power ,if the
start /pause button is not pushed the washing machine
will automatically switch off the power after 5 minutes.
Wash
Standard
Rinse
Soak
Spin
Soft
Tub dry
Quick
PROGRAM
"PROGRAM" button
Program
STANDARD
QUICK
WASH
RINSE
SPIN
WASH
RINSE
TUB DRY
After a beep sound,the child lock
button
POWER
START/PAUSE
"START/PAUSE" button
After the power is switched on,
press it to start the machine .
During working push it to pause
During pause,push it to restart.
Applicable situation
Standard washing
Washing the relatively big thick or very
SOAK
dirty laundries
Washing the woollen textiles
SOFT
Posthaste wash of the laundry
with light soil
When the indicator light of WASH,
RINSE,SPIN is on,the program is set.
Fast washing for light soil laundries
(quicker than STANDARD program)
Just run the washing cycle without
drainage cycle. The detergent was left
in the tub and can be recycled.
Remove the left detergent from the
clothes and then rinse the clothes.
When the clothes are washed or
SPIN
the clothes are quite wet,extra spin
is needed.
The purpose is drying the inner tub
and the outer tub,which can avoid
growing mildew.