Brother BE-0901E-AC Instruction Manual page 10

1. Press three times.
2. Select with
3. Press
.
4. Choose the device to read from with
The factory setting is
Go to step 5 if the chosen device is
Go to step 6 if
5. Choose the item to modify with
The above shows an example of the device to read from: floppy disk, the reading mode: MANU, the
automatic continuation after sewing: discontinue, and the initial data reflection: don't reflect.
6. To read the data from a floppy disk, insert the floppy disk into the operation panel.
To read the data from a computer, establish connection with it.
To read the data via network, arrange the network for the communication.
7. Press .
8. Choose the first data for the sewing with
Each stroke on
alphabetical order.
E-2
keys.
memory.
floppy disk、
memory is chosen.
keys and press
key will switch the order of the data to the input date order or the
keys.
personal computer or
to edit the setting.
keys and press
Shows the mode for the reading.
Shows the device to read from.
network.
.