Advertisement
Patch 86222-06 For Rapier Switches and AR800 Series Modular Switching Routers
Patch 86222-06 for Software Release 2.2.2
C613-10319-00 REV F
PCR: 01167
Module: ENCO
RSA encryption is now periodically suspended to ensure other processes
get some CPU time during large RSA calculations.
PCR: 01169
Module: ISAKMP
The CREATE ISAKMP command now checks that the key specified by the
LOCALRSAKEY parameter actually exists in the ENCO module.
PCR: 01171
Module: ETH, TRIGGER
The INTERFACE parameter of the CREATE TRIGGER and SET TRIGGER
commands now supports Ethernet interfaces. Ethernet interface events can
now generate triggers.
PCR: 01173
Module: Telnet
The Telnet server's listen port can now be configured to a number in the
range 1 to 65535, excluding any ports already assigned as listen ports.
PCR: 01174
Module: Firewall
The CREATE CONFIG command sometimes generated scripts for rule
commands with GBLIP=0.0.0.0 when this was not necessary. This issue has
been resolved.
Features in 86222-03
Patch file details for Patch 86222-03 are listed in Table 4.
Table 4: Patch file details for Patch 86222-03.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01112
Module: IPG
DNS response packets with corrupt length fields were causing a fatal error.
This issue has been resolved.
PCR: 01139
Module: IPG
IP NAT caused a fatal error when an ARP wait timer timed out and tried to
send a host unreachable message. This issue has been resolved.
PCR: 01147
Module: STT
The router was restarting after a "teardrop" attack on the STT listen port.
This issue has been resolved.
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
86s-222.rez
8-Aug-2001
86222-03.paz
205828 bytes
Network affecting: No
Network Affecting: No
Network affecting: No
5
Advertisement
