Advertisement
Patch 86222-06 For Rapier Switches and AR800 Series Modular Switching Routers
Patch 86222-06 for Software Release 2.2.2
C613-10319-00 REV F
PCR: 01170
Module: IPv6
A fatal error occurred if an IPv6 interface was deleted while packets were
being transmitted. The number of current interfaces was not being updated
correctly when a new IPv6 interface was added. As a result, after multiple
additions and deletions, no more IPv6 interfaces could be added. These
issues have been resolved.
PCR: 01176
Module: PKI
The CREATE CONFIG command now adds PKI certificates to the script in
the same order that they were originally added to the certificate database.
PCR: 01177
Module: PKI
PKI certificates are now periodically checked (once per hour) to verify that
they are still valid.
PCR: 01178
Module: IPSEC
IPCOMP SA's which have the reserved CPI "3" are no longer deleted by
ISAKMP delete messages.
PCR: 01179
Module: SWI
When a VLAN was created and then destroyed on the G6 or G6F, the
VTABLE was corrupted. This has been fixed.
PCR: 01181
Module: DHCP
DHCP failed to send request messages when it was in a rebinding or
renewing state. This issue has been resolved.
PCR: 01185
Module: SWI
In some extreme traffic conditions the switch could lock up, preventing
switching of any traffic. This issue has been resolved.
PCR: 01186
Module: FIREWALL
When large numbers of sessions were being handled the firewall would
become overly aggressive in restricting new sessions. The Active TCP Opens
field in the output of the SHOW FIREWALL POLICY would show a very
high number (42 × 10
PCR: 01187
Module: IPG
If the IGMP table was empty and a timeout was set, a fatal error occurred.
This issue has been resolved.
8
). This issue has been resolved.
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
Network affecting: No
3
Advertisement
