Replacing The Microprocessor - Lenovo ThinkServer RD330 Hardware Maintenance Manual

10. Gently close the microprocessor retainer, press down the small handle, and then push the handle inward
to lock the retainer into position and secure the new microprocessor in the socket.
Figure 66. Securing the microprocessor in the socket
11. Install the new heat sink that comes with the microprocessor option kit. See "Installing or replacing a
heat sink" on page 110.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 153.

Replacing the microprocessor

Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 67.
This topic provides instructions on how to replace the microprocessor.
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the server and wait three to five minutes
to let the server cool before removing the server cover.
118
ThinkServer RD330 Hardware Maintenance Manual