Related Manuals for Haier HFD647ASS
Summary of Contents for Haier HFD647ASS
- Page 2 If you have any questions please contact Ithe Customer Care Department as indicated on the warranty card...
- Page 4 Water dispenser...
- Page 5 purchasing a please ensure the safe symbols are observed:...
-
Page 7: Safety Precautions
Safety Precautions number Place... - Page 10 away from high...
- Page 11 Removing and replacing the freezer drawer and ice bin Removing and Replacing FreezerDrawer...
- Page 13 removing please follow the instructions in reverse. Attention: Please do not disassemble the Refrigerator door handle. If the handle must be taken apart please contact a qualified technician.
- Page 14 Please do not disassemble the Freezer door handle. If the handle must be taken apart please contact a qualified technicia See page 11 for instructions on how to connect the water.
- Page 15 Assembling the water filter For water dispenser product only Contents of filter kit 4 m (13 ft) white 6 mm ( ”) tubing 1 x 200 mm (8”) blue tubing 1 x pressure reducing valve (PRV) 1 x double sided foam 2 x locking keys 1 x water filter cartridge and head 1 x tap connection –...
- Page 16 The first time you require water out of the dispenser, there will be a delay while the water reservoir fills up. Run a further 3 litres (3 qt) through the system, stopping intermittently to ensure the reservoir is flushed out. Failure to do this will result in excessive dripping from your dispenser. Important! •...
- Page 17 Attach double sided foam to the back of the water filter head as shown in Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove double sided foam backing and attach filter to the desired position as located in step 10 (refer to previous page).
-
Page 18: How To Use The Water Dispenser
How to Use the Water Dispenser Available on some models FRZTEMP REFTEMP FUNCTION 1.Push the dispensing pad gently,using a glass cup. 2.If you want to stop the flow of water,release from the dispensing pad. Installation instructions: Ensure that refrigerator is not plugged into a power Diagram 1 supply. - Page 19 Adjustment To ensure normal operation,allow the appliance to stand still for 6 hours.