Advertisement
Freezer Drawer
27
Assembling the water
filter
For water dispenser product only
Contents of filter kit
1
4 m (13 ft) white 6 mm ( ") tubing
2
1 x 200 mm (8") blue tubing
3
1 x pressure reducing valve (PRV)
4
1 x double sided foam
5
2 x locking keys
6
1 x water filter cartridge and head
7
1 x tap connection – 15 mm ( ") BSP
1
2
Important!
•
It is imperative the pressure reducing valve (PRV) is fitted prior to the filter. This valve ensures the
water will not flow back into the mains from the refrigerator water system. If the PRV is not fitted to the
connection line your Ice & Water refrigerator features may not function in some circumstances.
•
It is recommended that an authorised plumber in your state or town is used to install the water
connection.
•
The new tubings supplied with the refrigerator are to be used, old tubings from old Ice & Water
connections should not be used.
Installation precautions/warning
•
DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
•
WARNING – connect to potable water supply only.
•
DO NOT install on line pressure above 900 kPa (130 psi) or below 150 kPa (22 psi).
•
DO NOT use on hot water supply (38°C [100°F max.]).
•
DO NOT install near electrical wires or water pipes that will be in the path of drilling when selecting
the location of filter system.
•
DO NOT mount filter in such a position so that it will be struck by other items, such as wastebaskets,
etc.
•
DO NOT install the filter in direct sunlight as prolonged exposure to light can weaken plastic
components.
•
DO NOT install in a location that is susceptible to freezing temperatures as damage to the housing
could occur.
•
DO NOT screw filter to fridge.
•
AVOID contamination of pipes during installation.
•
DO NOT use copper tubing. The plastic tubing supplied should always be used.
3
4
5
6
Fig.1 Water connection kit
7
Advertisement
