Advertisement
have an
To turn the ice maker on and off
press (Function) button to scroll to the (
press (Function) button to scroll to the (
) screen,(
)light on then press(ok),ice maker is turn on.
) screen,(
)light off then press(ok),ice maker is turn off
25
11.
Attach double sided foam to the back of the water filter head as shown in
Diagram 5. Write the date to be replaced on the filter (date installed + 6
months). Remove double sided foam backing and attach filter to the
desired position as located in step 10 (refer to previous page).
12.
Run the 6 mm (¼") tubing to back of the fridge ensuring there is enough
tubing to pull out the refrigerator for service.
13.
Connect tubing into the water (solenoid) valve located on the right hand
side of the unit (compressor) compartment as shown in Diagram 7.
Beware of hot pipes.
14.
Pull gently on tubing to ensure it is locked in as shown in Diagram 8.
15.
The completed installation should look like Diagram 9 on page 14.
Diagram 7
.
16.
Turn isolating tap on and check that all connections are dry and free of drips. If not, please
alert the plumber.
17.
Coil water line tubing behind the fridge. Push your refrigerator into place being careful not to
kink or squash the water line running into the water (solenoid) valve.
Fig.7Double sided
foam attachment
Diagram 8
Diagram 6
Diagram 5
Advertisement
