Kyocera FS-C1020MFP Quick Manual page 34

Print Cartridges
Replacing Print Cartridges
• When removing print cartridges, be careful not to touch the Laser Scanning Unit on the
underside of the upper cover (the white area in the illustration).
• If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black
toner. Change the color mode setting to Black and White using the machine's driver.
• If black toner runs out, you cannot print in black and white or color until the black print cartridge
is replaced.
Pull up the lever on the top cover,
and then carefully raise the top
cover.
Make sure that the exposure glass cover or
ADF is closed.
Tilt the print cartridge forward and
pull it out.
• Do not shake the removed print cartridge.
Doing so can cause remaining toner to
leak.
• Place the old print cartridge on paper or
similar material to avoid dirtying your
workspace.
• The toner color is indicated by the label
on each print cartridge.
34 34
BPC221S
BPC222S
BPC223S