PLC-HP7000L Basic Serial Command Functional Specifications
6.34 INPUT 3 S-VIDEO Command
Command
"C34" [CR]
Select S-Video input in Input 3.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.35 INPUT 3 Y,Pb/Cb,Pr/Cr Command
Command
"C35" [CR]
Select Y,Pb/Cb,Pr/Cr input in Input 3.
Detail
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
6.36 POINTER RIGHT Command
Command
"C3A" [CR]
Move the Pointer of On-Screen Display Menu to the right.
Detail
This command works the same way as ">" button of the projector or remote
control.
Acceptable
Response
Unacceptable
6.37 POINTER LEFT Command
Command
"C3B" [CR]
Move the Pointer of On-Screen Display Menu to the left
Detail
This command works the same way as "<" button of the projector or remote
control.
Acceptable
Response
Unacceptable
6.38 POINTER UP Command
Command
"C3C" [CR]
Move up the Pointer of On-Screen Display Menu
Detail
This command works the same way as "▲" button of the projector or remote
control.
Acceptable
Response
Unacceptable
6.39 POINTER DOWN Command
Command
"C3D" [CR]
Move down the Pointer of On-Screen Display Menu.
Detail
This command works the same way as "▼" button of the projector or remote
control.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
17/27