Input 3 Command; Network Command; Video Mute On Command; Video Mute Off Command - Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications

6.10 INPUT 3 Command

Command "C07" [CR]
Select Input 3. This command works differently from the command by "Input 3"
key of the remote control. When Input 3 has been selected, this command does
Detail not execute the source switching; just for switching to Input 3.
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.11 NETWORK Command

Command "C08" [CR]
Select Network Input.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.12 VIDEO MUTE ON Command

Command "C0D" [CR]
Video Mute ON
Detail This command works the same way as "SHUTTER" button of the remote control
for Shutter Close, but does not work for Shutter Open.
Acceptable
Response
Unacceptable

6.13 VIDEO MUTE OFF Command

Command "C0E" [CR]
Video Mute OFF
Detail This command works the same way as "SHUTTER" button of remote control for
Shutter Open, but does not work for Shutter Close.
Acceptable
Response
Unacceptable

6.14 SCREEN NORMAL SIZE Command

Command "C0F" [CR]
Detail Set screen size to Normal (4:3)
Acceptable
Response
Unacceptable

6.15 SCREEN FULL SIZE Command

Command "C10" [CR]
Detail Set screen size to Full.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
13/27