Step - Brother QL-1050N - P-Touch B/W Direct Thermal Printer Set Up And Operation Manual

Setup & operation guide - english

Hide thumbs Also See for QL-1050N - P-Touch B/W Direct Thermal Printer:

Table of Contents

Available languages

9-2 Choose QL-1060N from the list and click Add again to add the

printer to the Printer Setup Utility.

(Mac OS

X 10.3.9)

Now, go to step 10.

For Network interface cable users (Manual Network Configuration)

(Mac OS

X 10.3.9) Click Add and choose IP

Printing at the top of the screen. Enter the IP

address of the printer into the Printer

Address box. Choose QL-1060N from the list

and click Add again to add the printer to the

Printer Setup Utility.

(Mac OS

X 10.4.x) Click Add and choose IP

Printer at the top of the screen. Enter the IP

address of the printer into the Address box.

Choose QL-1060N from the list and click Add

again to add the printer to the Printer Setup

Utility.

When specifying the Queue Name, use the value brn_xxxxxx_p1 at where

xxxxxx are the last 6 digits of the Ethernet address.

When the screen returns to the Printer List screen, check that "QL-

1060N" is added, and close the Printer List screen.

Now you can use the machine.

For details on software, see the P-touch Editor Help.

(Mac OS

X 10.4.x)

STEP

Table of Contents

Table of Contents