Step; Safety Precautions; To Use The Machine Safely - Brother TD-4000 User Manual

Safety Precautions

Read and understand all of these instructions and save them for later reference. Follow
all warnings and instructions marked on the product.
WARNING
Tells you what to do to avoid accidents and the risk of injury.
Tells you about procedures you must follow to avoid minor personal injury or
CAUTION
damage to the printer.
The safety and precaution symbols in this guide are as follows:
Action NOT allowed to do
DO NOT splash the product with or
immerse the product in water.
Mandatory action
Alerts to the possibility of electrical
shock

To use the machine safely

Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of
injury.
The Machine
Unplug the power cord immediately and
stop using the machine during an
electrical storm. There may be a remote
risk of electric shock from lightning.
Do not touch any metal parts near the
print head. The print head becomes very
hot during use and remains very hot
immediately after use. Do not touch it
directly with your hands.
Plastic bags are used in the packaging
of your machine. To avoid danger of
suffocation, keep these bags away from
babies and children.
Unplug the power cord immediately and
stop using the machine if you notice any
abnormal odour, heat, discoloration,
deformation or anything unusual whilst
the machine is in use or storage.
Do not disassemble the machine.
For inspection, adjustment and repair of
the machine contact the retail outlet
where the machine was purchased or
your local authorized service center.
DO NOT disassemble the product.
DO NOT touch a given portion of the
product.
Unplugging
WARNING
To prevent damage, do not drop or hit
the machine.
Do not hold and lift the machine by the
RD Roll compartment cover. The cover
could come off and the machine could
fall and become damaged.
Do not allow the machine to get wet in
any way.
The electrical outlet should be close to
the machine and be easily accessible.
Do not touch the cutter. Personal injury
could result.
Do not hold the machine with only one
hand. The machine may slip out of your
hand.
Never disassemble the machine or allow
it to get wet to avoid possible fire or
electrical shock.
2

STEP

1
STEP
2
STEP
3