Xerox 8860MFP - Phaser Color Solid Ink Letter Of Volatility

Xerox Phaser 8860 MFP printer
The chart below shows the corresponding memory types for the Xerox Phaser
8860 MFP printer. Please note, there are no remnants of customer print data
retained in the printer when both of the following are true:
(a) The power is turned off
(b) The hard disk drive is removed (from printers with hard drives)
Phaser 8860 MFP
Model Number
8860 MFP/D
All Models
All models
All models
All models
All models
All models
All models
Note:
Flash is used for Firmware code and contains no user data.
*** All EEPROM's do not contain user print data
Letter of Volatility
Memory Size Memory Type
Standard/
Maximum
512MB/1GB DDR SDRAM
40GB Hard Disk
(Standard)
8K (Head) EEPROM
32 Byte EEPROM
(Maintenance
kit)
16K(N/W, EEPROM
Engine)
4Mbit/(FPGA) EEPROM
4MB Flash
32K Configuration
Card(EEPROM)
Volatility User
Data
Volatile Yes
Non-volatile Yes
Non-Volatile No***
Non-Volatile No***
Non-Volatile No***
Non-Volatile No***
Non-Volatile No***
Non-Volatile No***