Konica Minolta bizhub C224 Quick Start Manual page 31

2
No. Name
1 Main unit
2
Fax Kit FK-511
3 Authentication Unit AU-
102 (Biometric Type)
4
Authentication Unit AU-
201 (IC Card Type)
5 Working Table WT-506
6
Keyboard Holder KH-102
7 Security Kit SC-508
8
Mount Kit MK-730
9 Image Controller IC-414
10
Large Capacity Unit LU-
301
11 Large Capacity Unit LU-
204
12
Desk DK-510
13 Paper Feed Cabinet PC-
410
14
Paper Feed Cabinet PC-
210
15 Paper Feed Cabinet PC-
110
16
Desk DK-705
17
Saddle Stitcher SD-511
18 Finisher FS-534
19
Punch Kit PK-520
20 Saddle Stitcher SD-512
21
Finisher FS-535
22 Punch Kit PK-521
23
Z Folding Unit ZU-606
24 Post Inserter PI-505
25
Job Separator JS-602
26 Output Tray OT-503
27
Finisher FS-533
28 Punch Kit PK-519
29
Job Separator JS-506
2-6
Description
Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
Required to use the fax function.
Working Table WT-506 is required as a stand.
Working Table WT-506 is required as a stand.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
Install this holder to use an external keyboard.
Supports functions such as Copy Guard to prevent unauthorized
copying.
Used to print on banner paper.
Built-in Image Controller. Installing this unit provides higher quality
printing results.
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size
paper.
Used to place this machine on the floor.
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
Can load up to 500 sheets respectively into the top and bottom
trays.
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
Used to place this machine on the floor.
Used to add the bind/fold function to the Finisher FS-534.
Sorts, groups, or staples output sheets as required.
Used to add the punch function to the Finisher FS-534.
Used to add the bind/fold function to the Finisher FS-535 (only for
bizhub C554).
Sorts, groups, or staples output sheets as required (only for bizhub
C554).
Used to add the punch function to the Finisher FS-535 (only for
bizhub C554).
Adds the Z-fold or punch function to the Finisher FS-535 (only for
bizhub C554).
Inserts a cover sheet into copied or printed sheets (only for bizhub
C554).
Feeds out printed sheets (only for bizhub C554).
Collects printed pages.
Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
Used to add the punch function to the Finisher FS-533.
Used to separate output sheets into two trays in the body of the ma-
chine.
About this machine
bizhub C554/C454/C364/C284/C224
2.2