www.solutechnic.com
Paper type
Form
Backing paper width
Label width
Label length
Gap between labels
Edge cutoff on left/right side
Label edge R
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Roll paper core
External diameter
Winding direction
• Do not use the paper with a hole or cutout.
• when using this type of paper, the label end and the black mark end of the black mark
38
SOLUTECHNIC PARIS-NORD SARL- 52 rue d'Emerainville - Bât Le Croissy A -Marne la Vallée - 77183 CROISSY BEAUBOURG
Tél 01.64.66.80.40 - Fax : 01.64.66.82.18 - mailto : info@solutechnic.com - http://www.solutechnic.com
Plain Media
Roll paper
30 to 112 mm
25.4 to 108 mm
25.4 to 1117.6 mm
When it is less than 15 {0.59"} to 25.4 {1"} mm, use the label of
"When removing right and left fringes only" in the illustration.
3 to 5 mm
2 ± 0.5 mm
2 mm or less
13 mm or more
9 mm or more
8.5 ± 1 mm
15 mm or more
0.128 mm
Outside diameter: 44.1 mm
Maximum 101.6 mm
Printing face must be facing outside.
position on the die-cut label must be matched.