www.solutechnic.com
Status/Error Indications
The printer status is displayed with combination of lighting and flashing of LEDs.
When an error occurs, you can find out the cause and the remedy from the LED indication for
the error.
/
: Lights
LED
Power
Error
—
—
SOLUTECHNIC PARIS-NORD SARL- 52 rue d'Emerainville - Bât Le Croissy A -Marne la Vallée - 77183 CROISSY BEAUBOURG
Tél 01.64.66.80.40 - Fax : 01.64.66.82.18 - mailto : info@solutechnic.com - http://www.solutechnic.com
/
: Flashes
: Off
Ink
Paper
Power on
—
—
Powering off
Charging ink
—
—
Closing roll paper cover
Saving or printing data
AID temperature error
Maintenance requirement
Fatal error
Cutter error
Chapter 1 Product Overview
: No change
—
Status
The ambient temperature
may be too low or too high.
Make sure that the ambient
temperature between 10° C
and 35° C, turn off the printer
and then turn it back on. (See
"Environmental Conditions" on
page
The printer needs repair.
1. Turn the power off.
2. Open the roll paper cover
and remove the jammed
paper if any. (See
Jammed Paper" on page
149.)
3. Turn the power on.
If the same error persists, the
printer needs repair.
—
Remedy
—
—
54.)
"Removing
21
1