Handle Positions; Height Adjustments - Bissell Trilogy Pet User Manual

O
perations

handle positions

1. In upright position, tilt cleaner back on
its rear wheels to transport from room to
room. The vacuum can also be moved
by using the carrying handle on front of
the vacuum.
2. Using your foot, press handle release
pedal on the lower left side of the
vacuum to recline vacuum in cleaning
position.
note: the brush will only rotate
when vacuum is in reclined clean-
ing position, it will not rotate
when in upright position.

height adjustments

turn dial on powerfoot to adjust to
one of 7 height adjustments:
lowest setting – for low pile carpet
or bare floors.
Medium settings – for medium pile
carpet.
high setting – For high pile and most
shag carpet. Adjust to high setting if dif-
ficult to push.
note: for optimal carpet clean-
ing performance adjust to lowest
practical setting. if your vacuum is
difficult to push, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the
cleaner back slightly to take the weight
off of the foot while turning.
w w w . b i s s e l l . c o m
attention:
Some Berber carpets have a ten-
dency to fuzz with wear. Repeated
strokes in the same area may
aggravate this condition. Consider
setting your cleaner on a higher
than normal setting for this type of
carpet.
notice:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely harm-
less and are not associated in any
way with the main power supply.
8 0 0 . 2 3 7 . 7 6 9 1
Handle
release
Pedal
7