Power Up Control - Asus MES-N User Manual

4. BIOS SETUP

4.5.1 Power Up Control

AC PWR Loss Restart: [Disabled]
This allows you to set whether you want your system to boot up after the power has
been interrupted. [Disabled] leaves your system off after reapplying power and [En-
abled] boots up your system after reapplying power. Configuration options: [Dis-
abled] [Enabled]
PWR Up On Modem Act: [Enabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
(turning the ATX power supply on) when the modem receives a call while the com-
puter is in Soft-off. Configuration options: [Disabled] [Enabled]
NOTE: The computer cannot receive or transmit data until the computer and appli-
cations are fully running, thus connection cannot be made on the first try. Turning an
external modem off and then back on while the computer is off causes an initializa-
tion string that will also cause the system to power on.
Wake On LAN: [Enabled]
Wake-On-LAN allows your computer to be booted from another computer via a net-
work by sending a wake-up frame or signal. With this feature, network administrators
can remotely boot an entire network of computer systems during off-peak hours for
software updating or maintainance. Configuration options: [Disabled] [Enabled]
IMPORTANT: This feature requires an optional network interface with Wake-
On-LAN and an ATX power supply with at least 720mA +5V standby power.
Automatic Power Up: [Disabled]
This allows automatic system power up. Configuration options: [Disabled] [Enabled]
ASUS MES-N User's Manual 65