Asus MES-N User Manual page 18

3. HARDWARE SETUP
1) Keyboard Power Up Setting (3-pin KB_UP)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing any key or the
spacebar depending on your motherboard) to power up your computer. This
feature requires an NLX power supply that can supply at least 300mA on the
+5VSB lead. The default is set to Disable because not all computers have the
appropriate NLX power supply. Your computer will not power ON if you set
this to Enable and do not have the appropriate NLX power supply.
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N Keyboard Wake Up
2) Onboard VGA Setting (VEN_DIS)
The onboard AGP VGA may be enabled or disabled using this switch. Disable
the onboard VGA if you are using a VGA card on the expansion slot.
Setting
Enable
Disable
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N Onboard VGA Setting
18
3 2 1
Disable
(Default)
VEN_DIS
[2-3] (default)
[1-2]
VEN_DIS
3
2
1
Disable
ASUS MES-N User's Manual
KB_UP
3 2 1
Enable
3
2
1
Enable
(Default)