Troubleshooting - Asus MES-N User Manual

6. SOFTWARE REFERENCE

6.3.2 Troubleshooting

Cannot install
• Do you have the required hardware, such as hard disk and memory?
• Do you have the required software, such as MS-DOS and Windows?
• Installation may not be possible if you have insufficient space on your hard disk.
Delete unneeded files to increase the free space on your disk.
Does not start
• Do you have the required hardware, such as hard disk and memory?
• Do you have the required software, such as MS-DOS and Windows?
• Were you able to install using the specified procedure?
No sound
• Is the MIDI driver correctly installed?
• Is the tone generator set correctly?
• Is volume set to zero in the XGstudio Player or XGstudio Mixer panels?
• If you are using an external tone generator, is the serial or MIDI cable and the
audio cables connected correctly?
• Are the volumes of your tone generator, audio playback system, and application
raised?
• If you have connected an external tone generator via a serial cable, is the rear
panel select switch set correctly? (For the name of the select switch, refer to the
owner's manual for your external tone generator.)
• If you are using a Soft Synthesizer, is it set so that the computer sound output is
heard correctly?
6.3.3 About the driver
In order to use XGstudio, the driver must be correctly set and selected. The driver
you use will differ depending on the type of your tone generator.
If you are using an external MIDI tone generator whose HOST connector is connected
to the serial port of your computer, you must install the YAMAHA CBX Driver.
Tone generator used
Soft Synthesizer S-YG20
Soft Synthesizer S-YG50
External YAMAHA tone generator
(MU80 or MU50 etc.)
External tone generator of
another manufacturer
94
Driver to select and set
Select the YAMAHA SGMP Driver
Select the YAMAHA SXG50 Driver
Select the YAMAHA CBX Driver
Refer to the owner's manual for
your tone generator.
ASUS MES-N User's Manual